Garage Door Installation Mistakes You Need to Avoid

5 Most Common Garage Door Installation Mistakes You Need to Avoid

Garage door installation is installing a beautiful garage door or replacing an existing one. It includes several tasks like measuring, cutting, mounting the door components, and embedding the necessary hardware and wiring. It also guarantees that all safety features are in place and working in their best condition. 

During that phase, people might need to correct mistakes that hinder the garage door installation, including incorrect measurements, improper parts assembly, and hardware fastening. 

Most Common Garage Door Installation Blunders to Avoid

Making errors while installing a garage door is the most common sign that every homeowner should counter. To guarantee hassle-free garage door installation and that your new garage door works properly. Avoiding these common errors that can hinder your overall process. Here are a few of them that you need to avoid:                           

Inappropriate Measurements

Incorrect door measurements can cause major concerns for homeowners. Not only can it turn into poor door functioning, but it also causes structural damage to the door and increases gaps that allow a cool breeze to enter the garage during chilling winter and hot air in the harsh summer. To eliminate this error, measuring carefully and double-checking all the measurements before finalizing a garage door and commencing the garage door installation process is vital. It is also wise to seek help from a professional garage door company in Centennial

Matching Your Paint Colors

After it is set up, your garage door can be painted in the color of your choice, especially if you are concerned about matching your new garage door to the exterior of your home. Furthermore, it could be tempting to paint it the same color. Thus, matching your garage’s color to your house’s color is a design blunder that should be avoided. 

Poor Garage Door Opener Replacement 

Another typical blunder is misplacing the garage door opener. If you connect the opener incorrectly, the door will not work properly. People sometimes link the door opener to only one side. If you do this, you’ll notice that the door twists every time it opens.

The lift motor should be connected to the door opening’s center. It is positioned in the center to prevent the door from binding and the panels from bending. You can place the opener off-center if your door has torsion springs. While certain models allow for off-center installation, check the installation directions for your door to ensure proper placement.

If you or your loved ones need garage door cable repair, then it is better to schedule your visit to a well-reputed door repair and installation company. 

Employing Wrong Hardware Fasteners

In this move, ensuring that all hardware is securely fastened with adequate fasteners is important. Loose hardware can cause the door to become unbalanced and more noisy. It also makes your garage door unsafe.

Fail to Connect Wires Properly

Failure to properly connect the wiring is a typical blunder during professional garage door installation. When wiring is not properly connected, the door can malfunction, posing serious safety risks and requiring costly repairs. To avoid this problem, inspect the wire during installation and ensure it is connected and secured.


It is also critical to have a professional evaluate the wiring before and after installation to guarantee it is properly functioning. Connecting wire properly during installation will help you avoid costly repairs and keep your family safe.

Final Thoughts!

Installing garage doors requires time and effort, but sometimes proficient technicians make blunders that can adversely impact your garage door installation process. This blog demonstrated a clear overview of several of the most common garage door installation mistakes and their sure-shot solutions. You can also contact the M&A Garage Door Repair technicians for more details. 

Why Do You Need Garage Door Repair Services?

You need to give your garage door more thought when functioning properly. Problems with a door, its hardware, or any of its constituent pieces are what bring them to light. This is when most garage door repair services will send a specialist to your home.

Many people need help understanding garage door repair Centennial. Let’s start with garage door repair basics before discussing common concerns. Knowing the risks lets you avoid them.

Common Problems with Garage Doors

Now that you’re familiar with the fundamentals of Garage Doors Centennial co, we’ll go over some of the most frequent problems and how to fix them.

Broken Springs

The garage door springs allow for a limited amount of manual openings and closings. If you are home when they shatter, you will hear it immediately. When a garage door spring breaks, the noise can be as loud as fireworks. Attempting to open or close the door now could result in serious injury. The door could jiggle if the spring is still tense, and someone could be hurt if it suddenly snapped. Do not open your garage door if the spring is broken. Fix that garage door ASAP. Only go in there once the door is fixed, too.

Broken Cables

Cables can snap for various reasons, including regular wear and tear, broken springs, and excessive tension. When a cable breaks, the door may appear “sagging” on one side. It could also look like it weighs more there.

The entrance opens at a little slant, with a lower section on one side. If all the cables are frayed, the door might not stay shut. As soon as you pick it up, it will collapse, which could cause injury.

Sticking Rollers

Rollers for the door must be able to rotate in both directions. If they become trapped and start sliding, they might go off the rails. Sticking rollers can also make a racket when the door is opened and closed.

If the door comes off its tracks when open or closed, it does not have to be reinstalled. If you try to open or close the door, you risk snapping cables and springs. If your door only makes noise, try replacing the rollers and cleaning the tracks. Sticking rollers are typically caused by insufficient lubrication and high humidity.

A Closed Door That Reopens

Adjusting the garage door opener is necessary when this happens. The door’s limit settings are changed to accomplish this. Based on typical use, they may occasionally need fine-tuning or re-syncing.

The threshold and travel limit settings on a door tell it when it can be opened or closed. The door’s opener will mistake the contact with the ground for a collision with an object and reopen the door.

Something blocking the door sensors is another possible source of this issue. Both sides of the garage door or a few inches below the ground on the inside wall will have sensors. Sensors will open the door if something is blocking it.

The Door Opener Turns On, but No Door Is Opened

If you suspect that the disconnect cord may have been yanked, try opening and closing the door manually. If you have an automatic door opener, you must reconnect your door to its arm. The act of locking the garage door is another possible explanation. Check for lock.

Check for a tripped circuit breaker or unplugged opener if the door won’t open. If the door still doesn’t operate after checking these things, it may be electrical or need replacement.

Professional Garage Door Repair: Why You Should Do It

There are many reasons why you should engage a garage door repair business for garage door installation:


Technicians who work professionally have the training and experience to complete risky garage door repair centennial safely.

Savings in both time and money

You won’t have to wait around while the repairs are done, and you won’t have to worry about the damage worsening and costing more to correct down the road.


Putting off replacing your garage door by making regular, professional maintenance will help it last for years.


The peace of mind you get from a warranty on a competent garage door repair centennial is priceless.


There are several potential causes of a damaged garage door. If you have any issues with your garage door, don’t hesitate to Call M&A Garage Door! In addition to new garage door installations and garage door repair centennial, our specialists can also set up and fix broken garage door openers.